Gr2 Titanium Disc

Gr2 Titanium Disc

Custom made 99.99% Titanium pure metal material Ti sputter target for sale. The surface is clean and smooth without peeling, folding, pores, cracks and other defects. Using ultrasonic testing, penetration testing, appearance testing;
Send Inquiry
Description
Gr2 Titanium Disc Introduction

 

 

Custom made 99.99% Titanium pure metal material Ti sputter target for sale. The surface is clean and smooth without peeling, folding, pores, cracks and other defects. Using ultrasonic testing, penetration testing, appearance testing;

 

1.Details of Gr2 titanium disc

 

Standard

 ASTM B381

Grade

GR2

Dimension

Thickness (1mm-500mm) × Outside diameter (max.600mm) DN10--DN2000

surface condition

Surface quality: The surface roughness Ra of the two end surfaces should not be greater than 3.2lμm (which meets the requirements of ultrasonic inspection), and the surface roughness Ra of the inner and outer sides should not be greater than 12.5μm (when ultrasonic inspection is required on the outer circumferential surface Ra should not be greater than 3.2 μm), and the chamfer radius is 5 to 15 mm. Surface finish: clean, dust-free, better acid-resistant life.

Types

Testing: mechanical properties, chemical composition testing, ultrasonic testing.

Application

1. Electroplating;

 2. Chemical engineering & Petrochemical technology;

 3. Medical: titanium alloy (Ti6Al4V-ELI F136) and cp titanium (Ti Gr.2 F67) for implants

4.Use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications

Packaging & Delivery

 

Packaging Details

standard export package, wooden case or according to customer's request

Port

Tianjin port, Qingdao, shanghai

Lead Time :

Quantity(Kilograms) 1 - 500 >500

Est. Time(days) 15 To be negotiated

Place of Origin

Baoji, Shaanxi,  China

Quality Assurance

According to globally recognized standards, such as ASTM.

 Chemical composition, Mechanical properties, Microstructure are strictly controlled.

The Third Party Quality Test Certificate---Baoti Group

ISO Quality Management System

Guarantee of refund, replacement within 30 days.

 

2. Chemical composition of Gr2 titanium disc

 

Grade

N

C

H

Fe

O

Al

V

Pd

Mo

Ni

Ti

Gr2

0.03

0.08

0.015

0.30

0.25

/

/

/

/

/

Balance

 

3.Mechanical properties of Gr2 titanium disc

 

Grade

Tensile Strength,

Min MPa

Yield Strength

Min MPa

Elongation in 4D,Min, %

Reduction of Area, min %

Gr2

345

275

20

30

 

4. The development of titanium target

 

 

Increasing the utilization ratio of sputtering target is also the trend of target development

 

Increasing the utilization ratio of sputtering target is also the trend of target development. The conventional rectangular and cylindrical magnetron sputtering targets are solid. The circular magnetic field is established on the surface of the target by the circular permanent magnet, and the etching area is formed on the annular surface with equal distance between the axes, so the uniformity of the deposited film thickness is affected. The utilization ratio of the target is only 20% - 30%. The rotating cylinder magnetron sputtering target, which is widely used at home and abroad, is a hollow circular tube. It can rotate around a fixed strip magnet assembly and etch the target surface evenly at 360 degrees. The target utilization rate is as high as 80%.

Gr2 titanium disc
Gr2 titanium disc

 FirmLow carbon development trend

 

With the rise of low-carbon economy, energy conservation and environmental protection are the strategic elements to be considered in the development of enterprises. The target material serves for the energy conservation and environmental protection industry. As far as the industry itself is concerned, it also needs an energy conservation and environmental protection production environment. On the one hand, it is to meet the needs of the development of the industry as a whole, and on the other hand, it is also a guarantee to establish the corporate image and win the confidence of customers. The existing small-scale target material production plants in China need to be reconstructed in terms of equipment and working environment, otherwise, they will not only be difficult to develop, but also face the risk of closure.

 FirmTarget industry prospect estimation

 

In general, the target industry has a bright future. The rapid expansion of coating industry and the rapid expansion of market demand will undoubtedly drive the rapid development of target market. In addition, the target belongs to the field of new materials, which has been highly valued and strongly supported by the state. With the increasing demand of coating market and national support, a number of target enterprises will grow rapidly, become the leader of target industry, drive the development of the industry, and create considerable economic and social benefits.

product-706-469

 

 

   

 

Hot Tags: gr2 titanium disc, China gr2 titanium disc manufacturers, suppliers, factory, Gr2 Titanium Disc, Dental Implant Titanium Disc, Gr 1 Titanium Disc Plate, Titanium Target

Send Inquiry

(0/10)

clearall