Titanium ring widely used in oil drill pipe, oil exploration, oil drilling platform, vacuum coating pipe, mining equipment, coal chemical equipment, gas drilling equipment, such as high pressure resis
The density of titanium is low,which is only 4.51,anti-corrosion with high strength.The fatigue strength as well as sensibility to stress concentration of titanium is better than the steel of similar
It is a part made of non-ferrous metal titanium or titanium alloy to connect the pipe and the pipe to each other and connected to the pipe end. Titanium flanges have holes, bolts tightly connect the t
The surface is clean and smooth without peeling, folding, pores, cracks and other defects. Using ultrasonic testing, penetration testing, appearance testing.
The excellent inherent properties of Titanium Alloy include high strength, low density, good mechanical properties, corrosion resistance, high stability and so on.
Titanium looks like steel and has a silver-gray luster. It is a transition metal, and it has been considered a rare metal for a while. Titanium is not a rare metal. Titanium accounts for about 0.42% o
1.Low density and high strength; 2.Excellent corrosion resistance; 3.Good resistance to effect of heat; 4.Excellent bearing to cryogenic property; 5.Non Magnetic and non-toxic;
The chemical composition of titanium and titanium alloy pipes shall comply with the provisions of GB/T3620.1. When the buyer retests, the allowable deviation of the chemical composition of Mingkun Tit
Usually aluminum loses its original high mechanical properties at 150℃ and stainless steel at 310 ℃, while titanium alloys still maintain good mechanical properties at around 500℃. At present, China i
The density of titanium is small, so the inertia of the titanium liquid is small, and the flowability of molten titanium is poor, resulting in a low casting flow rate.
Using titanium alloy instead of stainless steel to manufacture high-pressure compressor disks and blades can reduce the weight of the structure. Every 10% weight reduction of the aircraft can save 4%
Pure Ti is used due to its high corrosion resistance and alloyed because of its high strength to weight ratio.